Magneto Coil Stator + Voltage Regulator + Gasket Assy For Honda CBR 600 RR RA 2013-2021
Features: Made of high grade magnetically conductive material to minimize the magnetic losses. Computerized winding to optimize quality of copper wiring Higher grade of electric components. Dramatically improves reliability and durability comparing to stock units. Best quality lead wires with insulation bring both enhanced abrasion and heat resistant. Rectifier made of highest quality electro-conducting lamination materials. Improved heat sink and charging capabilities. Direct replacement to your original unit. Plug-and-play, direct fit, instruction is NOT Included.
Fitment: Fit for Honda CBR600RA AC 2013 Fit for Honda CBR600RA AC 2014 Fit for Honda CBR600RA AC 2015 Fit for Honda CBR600RA 7AC 2016 Fit for Honda CBR600RA 7AC 2017 Fit for Honda CBR600RA 7AC 2018 Fit for Honda CBR600RA 7AC 2019 Fit for Honda CBR600RA AC 2019 Fit for Honda CBR600RA 7AC 2020 Fit for Honda CBR600RA AC 2020 Fit for Honda CBR600RA 7AC 2021
Fit for Honda CBR600RR 2A 2013 Fit for Honda CBR600RR 3AC 2013 Fit for Honda CBR600RR 4A 2013 Fit for Honda CBR600RR 5AC 2013 Fit for Honda CBR600RR A 2013 Fit for Honda CBR600RR AC 2013 Fit for Honda CBR600RR 2A 2014 Fit for Honda CBR600RR 3AC 2014 Fit for Honda CBR600RR A 2014 Fit for Honda CBR600RR AC 2014 Fit for Honda CBR600RR A 2015 Fit for Honda CBR600RR AC 2015 Fit for Honda CBR600RR 6A 2016 Fit for Honda CBR600RR 7AC 2016 Fit for Honda CBR600RR 6A 2017 Fit for Honda CBR600RR 7AC 2017 Fit for Honda CBR600RR 6A 2018 Fit for Honda CBR600RR 7AC 2018 Fit for Honda CBR600RR 6A 2019 Fit for Honda CBR600RR 7AC 2019 Fit for Honda CBR600RR A 2019 Fit for Honda CBR600RR AC 2019 Fit for Honda CBR600RR 6A 2020 Fit for Honda CBR600RR 7AC 2020 Fit for Honda CBR600RR A 2020 Fit for Honda CBR600RR AC 2020 Fit for Honda CBR600RR 6A 2021 Fit for Honda CBR600RR 7AC 2021
(Compatibility Chart is for reference ONLY!!!) (Please Compare with Your faulty unit and the image we provided to Decide Fitment)
Package Includes: 1 x Stator Coil 1 x Regulator Rectifier 1 x Generator Gasket
Note: Before installing your new stator regulator rectifier;
Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier. Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors. Our stator / regulator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
You will get exactly what you see in pictures, if in doubt do not hesitate to compare our item to your original part.
The meter was easy to install and gives clear, consistent flow readings. The digital display is easy to read, and the one-inch fittings connected securely.
