Magneto Generator Engine Stator Fit For Polaris Ranger 500 2x4 2006 2007 2008
Features: Direct replacement to your original unit Plug-and-play, direct fit, easy installation. Highest grade lamination materials. Highest grade copper windings, resistant to 200 degrees Celsius. Pick up pulsar coil included. Connector included. All products shipped are tested.
Other Specifications : Number of wires: 7 Number of pins: 17 Number of plugs: 10 Number of fixation holes: 5 Number of poles: 18
PART NUMBER(S): 3089579
Fitments: Fit for Polaris Ranger 500 2X4 2008 Fit for Polaris Ranger 500 2X4 CARB 2009 Fit for Polaris Ranger 500 2X4 CARB ISRAEL 2007-2008 Fit for Polaris Ranger 500 2X4/4X4/6X6 2005 Fit for Polaris Ranger 500 2X4/4X4 2006-2007
(Compatibility Chart is for Reference ONLY!!!) (Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included: 1x Generator Stator Coil
NOTICE: Before installing your new stator
Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier. Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
The meter was easy to install and gives clear, consistent flow readings. The digital display is easy to read, and the one-inch fittings connected securely.
