52mm Cylinder Piston Gasket Top End Rebuild Kit For Yamaha Aerox 100 / Bws 100 / MBK Nitro Minarelli 100 2T
Features: If your cylinder blows through, the compression is too low, or even a piston seizure has occurred, then this kit is exactly the right thing for you. Kit includes cylinder, piston, rings, pin, clips & top end gasket kit (you get exactly what is pictured). Piston is anodized for superior heat resistance and longer lifespan. The gaskets use performance materials to increase durability and provide greater reliability. Includes all gaskets pictured to rebuild top end. Kit is for standard bore size - 54mm, 14mm steel piston pin. This kit is excellent as a low-cost replacement for defects in the original cylinder.
Specifications: Condition: Aftermarket 100% Brand New Quantity: 1 Set Material: Steel Bore Type: Standard Bore Displacement: 100cc Bore diameter: 52mm Pin diameter: 14mm
other specifications: - Total height: 108mm - Height without sleeve: 85.5mm - Sleeve outer diameter: 60.9mm - Diagonal hole spacing: 75mm - Distance between the angle mounting holes: 48mm M6
Fits Models: Suitable for 2-stroke models with air-cooled 100cc Minarelli engine: Fit for Yamaha Aerox 100 AC 2T 2000-2002 Fit for Yamaha BW's 100 AC 2T 2007-2008 Fit for Yamaha BW's 100 AC 2T 1999-2001 Fit for Yamaha Neo's 100 AC 2T 2000-2002 Fit for Yamaha Zuma 100 AC 2T 2007-2008 Fit for MBK Booster 100 AC 2T 1999-2001 Fit for MBK Nitro 100 AC 2T 2000-2002 Fit for MBK Ovetto 100 AC 2T 2000-2002 Fit for Italjet Millenium 100 AC 2T 2000-2002 Fit for Benelli K2 100 AC 2T 1999-2002 Fit for Benelli Naked 100 AC 2T 2001> Fit for Benelli Pepe LX 100 AC 2T 2001> Fit for Aprilia Scarabeo 100 AC 2T 2000 (Minarelli Engine)
(Does not fit various aftermarket models or quad engines!)
(Compatibility Chart is for Reference ONLY!!!) (Please Compare with Your faulty unit and the image we provided to Decide Fitment)
Package includes: 1x Cylinder 1x Piston 1x Piston Ring Set 1x 14mm Wristpin 2x Circlips 1x Cylinder Base Gasket 1x Cylinder Head Gasket
(Comes exactly as pictured.)
Note: Carefully compare to your old parts to be sure this is the correct part for your machine.
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer. The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer Fits.
The kit fit correctly and included everything needed for the rebuild. The engine regained strong compression and now runs smoothly with plenty of power.
W
William Howeth
Check your piston. This one was an exact match for my engine. This one lined up with the valves perfectly. Others had different valve profiles in the piston.
C
Clara Bennett
When I first rebuilt my gy6 150cc motor I had low compression and excessive oil in the cylinder. I tore the engine apart again and found that my piston rings were installed upside down. I flipped them over the right way and the engine has 155psi compression and no oil problems. The motor runs great after 3 hours or so of run time. You DO NOT need to bore the case on your motor with this kit which as also really nice. You will almost certainly need to rejet your carb. I used a #125 main jet with this big bore kit, performance head, nibbi intake, and straight through exhaust.
E
Eric Cham
When I first rebuilt my gy6 150cc motor I had low compression and excessive oil in the cylinder. I tore the engine apart again and found that my piston rings were installed upside down. I flipped them over the right way and the engine has 155psi compression and no oil problems. The motor runs great after 3 hours or so of run time. You DO NOT need to bore the case on your motor with this kit which as also really nice. You will almost certainly need to rejet your carb. I used a #125 main jet with this big bore kit, performance head, nibbi intake, and straight through exhaust.
It was quite the job to install it this product, not due to the quality of it being aftermarket, because the job itself was really difficult.
However, I’m happy to report immediately after installing this replacement cat my sisters mpg was immediately restored to full capacity and her check engine light went off immediately!
LISTEN TO THIS PART!
IF YOU ARE PLANNING ON DOING THIS JOB MAKE SURE YOU KNOW WHAT YOU ARE GETTING YOURSELF INTO IT
IT WAS A VERY HARD JOB FOR A HOME USER
but it’s a good product!
Recommended!
Fit 2016 Kia Soul Base. My OEM cat cracked and replaced it 1 1/2 ago with an eBay knock off...Mistake, check engine light would not go off. This one after 35 miles the Check engine light went off and was able to pass emissions. 🎉 Heat shield fit to the original OEM bolts unlike the eBay one that I had to redrill and use smaller bolts. Included all nuts, bolts and gadgets. Much better build quality than the eBay junk. Lets see how long it will last. 🤞
