Steering Angle Sensor 27582AJ000 for 09-15 Outback 12-16 Forester Impreza
Specifics: Material: ABS Plastic Condition: 100% Brand New Type: Steering Angle Sensor Fitment Type: Direct Replacement Quantity: 1pcs Manufacturer Part Number:27582AJ000,27582-AJ000 Placement on Vehicle:Front
Fitment For: For Subaru Crosstrek 2016-2023 For Subaru Forester 2014-2024 For Subaru Impreza 2012-2016 For Subaru Legacy 2010-2014 For Subaru Outback 2010-2014 For Subaru WRX 2015-2021 For Subaru WRX STI 2015-2021 For Subaru XV Crosstrek 2013-2015
Installation instructions: Do not move the positioning pins during installation. 1. Return the steering wheel to the center position 2. Open the front cover of the steering wheel and take out the airbag spring (spring clock) inside 3. The angle sensor is located on the back of the spring. Remove the seal of the angle sensor and install the angle sensor in situ Note: Keep the steering wheel back to the center position during installation. Do not turn the spring and angle sensor 4. After installation, reinstall the steering wheel. Open the repair computer and connect the car, turn on the steering angle learning function to reset the angle sensor, and check if there is a fault code or a fault light is on. If there is, remove the fault code. Complete the installation.
The carb worked great. Obviously you need to do some adjustment setting these up. You need to set your throttle cable and then fine tune the air to fuel ratio but everything worked as intended. I have it on my 1970 Chevelle right now as a daily driver and I couldn't ask for anything more.
The price was cheap, surprisingly cheap and I mean it works great. It came with extra Jets so you can change the CFM but I just used mine out of the box bolted it on car fired right up as is.
